Custom Patches for Motorcycle Clubs, Priced Per Set

A single 3 piece patch set for your club runs $85, dropping to $75 per set at 10 sets, $65 at 25 sets, $55 at 50 sets, and $45 at 100 sets. That covers your top rocker, center patch, and bottom rocker as one set per member. Individual pieces are also available starting at $8 each for small orders, dropping as low as $5 each at volume. Standard turnaround runs 7 to 10 days from proof approval, or 5 days with rush production at $10 per patch. There is no minimum order, though shipping charges apply on every order regardless of size.

What Goes Into a Full Club Patch Set

A standard set covers the pieces most clubs order together, though every chapter builds theirs a little differently depending on rank structure and colors.

Most clubs go with embroidered patches for the full set, since the raised stitched look is the classic choice for cuts and vests. Some riding clubs skip the three piece setup entirely and go with a single, larger one piece back patch instead. This works well for clubs that want one bold design rather than a stacked rocker layout.

Motorcycle Club Patch Pricing

Here is what a full set costs at different order sizes.

If you only need one piece rather than a full set, say a single rocker or an officer tab, individual pieces are also available. There is no minimum order at all, even a single patch can be ordered on its own, though standard shipping charges apply to every order regardless of size.

What Changes the Price

A few things affect where your order lands within a given tier. Bigger patches use more thread and take longer to stitch, which affects cost. How much of the patch is covered in stitching also matters, a design with 100 percent stitch coverage costs more than one with lighter coverage. The number of thread colors used, the border style, and the backing type all play a role too.

Reorders Cost Less

Once your club's design is set up and approved the first time, that setup does not need to be repeated. Reorders, whether for a new member's patch or a newly promoted officer's tab, come with a 20 percent discount off the original pricing, since the setup work is already done.

Turnaround From Proof to Your Door

Once artwork is submitted, you will receive a proof for approval first. Production only begins once that proof is approved, so a quicker proof turnaround on your end helps move things along faster overall.

Standard production and shipping together run 7 to 10 business days from the moment your proof is approved. This is the number to plan around when you are ordering ahead of a specific event or ride.

For clubs working against a tighter deadline, rush production is available at $10 per patch, cutting turnaround down to just 5 days from proof approval. This is worth considering if you have a run, rally, or event coming up fast.

Being made in a US factory matters here too. Domestic production means shorter shipping distances and fewer customs delays compared to clubs ordering from overseas makers.

Sizing Rockers That Fit Your Cut

Getting rocker sizing right matters more than people expect, since a rocker that does not match your vest properly looks off no matter how good the stitching is.

Measure your vest seam to seam first, then leave about half an inch of space on each side beyond that measurement. This gives the rocker enough room to sit naturally without stretching tight across the seams.

For center patch and rocker width, most clubs keep the rockers matching the center patch's width, or up to half an inch wider on each side. If your club name is long, letter height may need to shrink slightly to fit comfortably along the rocker's arc without crowding the edges. For very small tabs with tiny lettering, like officer rank tags, woven patches handle fine detail and small text far better than standard embroidery can.

Backing and Borders for Leather and Denim

Sew-on backing is the stronger choice for leather cuts specifically. Leather flexes and moves as you ride, and heat adhesive backing can loosen over time under that kind of movement. Sewing avoids that problem entirely.

Iron-on backing works fine for denim vests or jackets that will not see the same level of flex and daily wear that a leather cut typically does.

Hook and loop backing is worth considering for prospect patches or any tab that may need to be swapped out later, since it allows changes without resewing every time.

For border style, merrow borders suit larger curved pieces like rockers particularly well, since the stitched edge holds its shape along a curve better than a straight cut border would.

Keeping Colors Consistent as the Club Grows

Clubs add new members and promote new officers over time, and matching colors exactly on every new patch matters for keeping the whole cut looking consistent. We keep your club's design on file after the first order, so new pieces, whether for a new member's name tag or a newly promoted officer's rank tab, use the exact same thread colors, border style, and backing as your original set, and come with the 20 percent reorder discount already applied.

Prospect patches that later upgrade to full colors can follow the same stored file, keeping the transition clean and consistent with the rest of the chapter. Clubs after a more traditional, textured look for their center patch sometimes choose handmade patches instead, which brings a slightly different finish than standard machine embroidery.

How to Order Your Club Set

Getting started is a simple four step process.

Send over your club logo, or a photo of your current colors if you are matching an existing design. You will receive a proof and a quote based on your quantity and design. Once you approve the proof, production begins. From there, your order moves through production and out for shipping, landing in your hands within 7 to 10 days of approval, or 5 days if you choose rush.

Browsing the full range of custom patches before you send over your logo can also help you decide on material and finish ahead of time. Ready to get your club's colors made properly? Reach out with your logo or current patch photo and we will get a proof started.

Why Clubs Order From StitchKrafts

Patches are made in our own US factory rather than outsourced overseas, which supports both quality control and faster domestic shipping. A single set costs less here than what a lot of other shops charge for the same three pieces, and that gap only grows in your favor as your order gets bigger. Your design stays on file after your first order, so every reorder down the line matches perfectly and comes at a 20 percent discount. There is no minimum order size, so whether you need one replacement patch or a full chapter set, we can help.

Frequently Asked Questions

How much does a 3 piece motorcycle club patch set cost?

A single set costs $85, dropping to $75 at 10 sets, $65 at 25 sets, $55 at 50 sets, and $45 at 100 sets, covering a top rocker, center patch, and bottom rocker per set.

How long do custom MC patches take?

Standard turnaround runs 7 to 10 business days from proof approval. Rush production is available at $10 per patch, cutting that down to 5 days.

What is the minimum order for club patches?

There is no minimum, a single patch can be ordered on its own, though standard shipping charges apply to every order regardless of size.

What size should a top rocker be?

Most top rockers run 11 to 13 inches wide and 2 to 3 inches tall, though exact sizing depends on your vest and club name length.

Should rockers be sewn or ironed onto a leather vest?

Sewn. Leather flexes as you ride, and iron-on backing can loosen over time under that movement, while sewing holds up much longer.

Can you match our existing club patches?

Yes, sending a clear photo of your current colors allows us to match thread colors and design details for new orders.

Can you make a single set first to check the design?

Yes, ordering one set for proof and approval before committing to a full chapter order is a smart way to confirm everything looks right first, and since there is no minimum order, this is easy to do.

Do you keep our design on file for reorders?

Yes. Once your club's design is approved and produced, we keep it on file so future orders, new members, new officers, or replacements, match exactly, and come with a 20 percent reorder discount.

One neutral note worth adding here: rocker placement and colors carry real meaning within club culture, so it is worth checking in with your chapter and any local customs before finalizing a bottom rocker design, particularly around territory naming.